McLellan Industries - Trucks, Mining, Pumps

HOSE REELS

"Discover the Best Bid Choice,

The Engineered Quality of McLellan"

PR516 Series

The basic reel design is for outside mobile use in extreme conditions. Can also be used in building applications.

- Handles hoses to 55 feet long!

- McLellan product reels for grease, air, oil
     oxy/acetylene, or water - have 12 3/8" diameter
     drums with cheek plates of 18 gauge steel,
     5"apart.

- The lubricated spring motor is hermetically sealed
     and completely isolated from dirt and moisture.
     Built to handle heavy hose loads such as:
     ceiling, floor, submerged, outside and extreme
     truck applications.

- Banded drive spring for better and safer operation.

- A heavy duty latching mechanism assures
     positive extension stop and easy retraction at
     any length.

- Frame is formed of 1/4" steel welded and braced
     in one piece.

- The fairlead arm is adjustable to 220° in six
     positions. Rollers are high density polyethylene,
     for near noiseless performance. (Black, to resist
     ultra-violet rays.)

- Inlet swivels are steel, with double o-ring seals.
     Oxy/acetylene and water reels are fitted with
     bronze swivels.

Extensive field testing for years, in every kind of weather and terrain.

When McLellan engineers became aware of the high failure rate in truck mounted hose reels, they went to work to find an economical solution. By beefing up the hardware in McLellan reels, and encasing the spring in a hermetically sealed, and permanently lubricated, reservoir, they produced a reel that not only out performs the competition but costs no more than other quality reels.

FR500 Series

FR500 Series - Designed for diesel, gas, water, waste oil.

The basic reel design is for outside mobile use in extreme conditions. Can also be used in building applications.

As with all McLellan reels, the FR500 Series reels have spring motors hermetically sealed and lubricated. Reels feature heavy latching mechanisms, heavy duty frames and six position roller fairlead arms with adjustable fairlead, for off-highway conditions.

- Swivel accommodates either pressure or
     suction.

- FR500 Series reels come in 2 sizes: FR500
     with cheek plates 7 ¼" apart and over-all
     width of 14 7/8". FR500X with cheek plates
     9 5/8 apart and over-all width of 17 ¼".

- 18 gauge steel cheek plates 25" in diameter,
     12 ¾" drum diameter.

- Fuel reel latching mechanism of non-ferrous
     metal to assure safe handling of flammable
     liquids.

- Swivels are all brass, with teflon packing
     seals

Hydraulic
Rewind
Product
Reel

Up to 90'
of hose!

Ordering Information
McLellan hose reels are shipped F.O.B. Hanford, CA. Furnish reel model number, hose size and length, and product type of dispensing nozzle. Specifications of products and equipment herein are subject to change without notice. If dimensions are critical, always request a certified print. Spring capacity determined by length of hose to be used.

Options:
- Reels shipped bare. Hoses, hose stops, hose
     bibs, nozzles and wands pictured in brochure
     are options.

- McLellan hoses in 55' lengths, with
     hose stops and dispensing nobles
     for all products available.

- Diesel and gas meters.
- Fuel swivels.
- Fuel pumps driven by electric, air, engine or
     hydraulic.

Warranty
All McLellan reels are warranted to be free of defects in materials and workmanship for one year, under conditions of normal use. (Complete McLellan warranty sent with every order, or upon request.) Design copyrights are registered on all McLellan reel products.

10 Reasons Reels Fail

1. Spring Motors - Because they are exposed to the atmosphere they rust chatter and break!
2. Latching Mechanism - Thin sheet metal or cast aluminum doesn't wear well.
3. Swivel - Improper design of sealing capabilities causes leaks.
4. Paint - Improper paint preparation causes paint failure!
5. Fairlead - Many reels come equipped with square hose guides that don't reach the full width causing hose build-up.
6. Base - Pressed sheet metal with Tac-welds will not live due to vibration and cracking.
7. Cheek Plates - Pressed sheet metal with the rim improperly formed or no forming leads to bending and cracking.
8. Fairlead Arm - If made of light material (pressed tin) when hose returns it will bend both arm and fairlead.
9. Reel Width - Many reel manufacturers make their reels over 8 inches wide! This limits the number of reels in a given space.
10. Spring Motor Housing - Other reel manufacturers have an open housing, exposing the spring to rust and failure.

For complete product information
or to request product brochures,
please call us:

McLellan
Equipment, Inc. - Industries, Inc.
251 Shaw Road - South San Francisco
California 94080 - Fax: (650) 589-7398
Tel: (650) 873-8100 - (800) 848-8449

Sales & Parts Contact Information

Privacy Policy

Click Here To

Send Us Email